AMSOIL DOT 3 & 4 Synthetic Brake Fluid maintains maximum ABS and traction-control performance. Brake fluid acts as a hydraulic fluid, transferring power and lubricating brake system components while also preventing corrosion. It must contend with extreme heat and the inevitable moisture contamination that can lead to a brake system failure.
Fights Water Contamination Water contaminates the brake system by seeping through microscopic pores in fl exible brake lines and seals and through the reservoir fi ll cap. Brake fluid itself is hygroscopic (attracts moisture). Once introduced to the system, water reduces boiling points and compromises performance. It corrodes brake parts, lines and seals, leading to eventual failure. AMSOIL DOT 3 & 4 Synthetic Brake Fluid's superior wet boiling points counteract these problems. It lubricates and protects intricate brake components despite the inevitable water contamination. A nitrogen blanket is added to each bottle during manufacturing to purge moisture and ensure the maximum level of performance.
Firm Pedal Feel The extreme pressure and high heat common to brake systems can push brake fluid beyond its boiling point, causing it to vaporize or "boil-off." Water contamination can accelerate the process. This leads to a spongy or unresponsive feeling in the brake pedal (vapor lock). In contrast, the unique chemistry behind AMSOIL synthetic brake fluids increases boiling points well beyond DOT standards, even when contaminated with 3.7 percent water. AMSOIL Brake Fluids maintain a stable viscosity over a wide temperature range and flow easily at the high pressures generated in today's automotive brake systems to deliver solid, reliable braking. Maximum ABS and Traction-Control Performance AMSOIL DOT 3 & 4 Synthetic Brake Fluid's low-viscosity (817 cSt) provides superior cold-weather performance and excellent ABS and traction-control responsiveness. It covers a broad range of applications and exceeds DOT 3, 4 and 5.1 specifications.
APPLICATIONS Use AMSOIL DOT 3 & 4 Synthetic Brake Fluid in passenger car, light truck and powersports applications that require a DOT 3, 4 or 5.1 product. Do not mix with DOT 5 fluid. Refer to your owner's manual regarding the proper change interval for your brake fluid and to determine the correct DOT classification. Change fluid every two years for maximum performance.
Consult the AMSOIL Product Guide at www.amsoil.com for more application information.
AMSOIL Brake & Parts Cleaner New Brake & Parts Cleaner is a professional-strength product that quickly and effectively removes oil, grease, brake fluid and other contaminants from brake parts and other automotive components. It cleans brake parts with no major disassembly and leaves no residue, helping eliminate brake squeal and chatter. - Quickly removes grease and oil - Leaves no residue - Dries quickly - Chlorinated, non-flammable formula - VOC-free
AMSOIL DOMINATOR® DOT 4 Synthetic Brake Fluid - Provides vapor lock protection through high boiling points. - Resists brake fade common in racing applications for a confident brake feel all the way to the finish line. - Nitrogen blanket added to avoid moisture absorption and prevent contamination during manufacturing and storage, ensuring top-quality fluid upon purchase.
Find out how to bleed your brakes.
Phone Orders: (800) 956-5695 - M-F 9am-5pm Central Time - Customer Referral Number: 1708529 Nationwide AMSOIL Dealer Serving the entire state of California including the cities of Castaic, Santa Clarita, Simi Valley, Palmdale, Newhall, Burbank, Glendale, Thousand Oaks, San Fernando, Los Angeles, San Diego, San Jose, San Francisco, and Fresno. We sell a full line of AMSOIL products for just about anything with an engine!! Be sure to check out the AMSOIL preferred customer membership to save up to 25% off your entire order and receive free shipping on orders over $100.
AMSOIL DEALER - David Bell - Castaic, California 91384